- The 22 wt.% Cr, fully ferritic stainless steel Crofer®22 H has higher thermomechanical
fatigue (TMF)- lifetime compared to advanced ferritic-martensitic P91, which is assumed to be caused
by different damage tolerance, leading to differences in crack propagation and failure mechanisms.
To analyze this, instrumented cyclic indentation tests (CITs) were used because the material’s
cyclic hardening potential—which strongly correlates with damage tolerance, can be determined
by analyzing the deformation behavior in CITs. In the presented work, CITs were performed for
both materials at specimens loaded for different numbers of TMF-cycles. These investigations show
higher damage tolerance for Crofer®22 H and demonstrate changes in damage tolerance during
TMF-loading for both materials, which correlates with the cyclic deformation behavior observed in
TMF-tests. Furthermore, the results obtained at Crofer®22 H indicate an increase of damage tolerance
in the second half of TMF-lifetime, which cannot be observed for P91. Moreover, CITs were performed
at Crofer®22 H in the vicinity of a fatigue crack, enabling to locally analyze the damage tolerance.
These CITs show differences between crack edges and the crack tip. Conclusively, the presented
results demonstrate that CITs can be utilized to analyze TMF-induced changes in damage tolerance.
