Kaiserslautern - Fachbereich Informatik
Filtern
Erscheinungsjahr
Dokumenttyp
- Dissertation (20)
Volltext vorhanden
- ja (20)
Schlagworte
- Visualisierung (20) (entfernen)
Fachbereich / Organisatorische Einheit
Computer-based simulation and visualization of acoustics of a virtual scene can aid during the design process of concert halls, lecture rooms, theaters, or living rooms. Because, not only the visual aspect of the room is important, but also its acoustics. In factory floors noise reduction is important since noise is hazardous to health. Despite the obvious dissimilarity between our aural and visual senses, many techniques required for the visualization of photo-realistic images and for the auralization of acoustic environments are quite similar. Both applications can be served by geometric methods such as particle- and ray tracing if we neglect a number of less important effects. By means of the simulation of room acoustics we want to predict the acoustic properties of a virtual model. For auralization, a pulse response filter needs to be assembled for each pair of source and listener positions. The convolution of this filter with an anechoic source signal provides the signal received at the listener position. Hence, the pulse response filter must contain all reverberations (echos) of a unit pulse, including their frequency decompositions due to absorption at different surface materials. For the room acoustic simulation a method named phonon tracing, since it is based on particles, is developed. The approach computes the energy or pressure decomposition for each particle (phonon) sent out from a sound source and uses this in a second pass (phonon collection) to construct the response filters for different listeners. This step can be performed in different precision levels. During the tracing step particle paths and additional information are stored in a so called phonon map. Using this map several sound visualization approaches were developed. From the visualization, the effect of different materials on the spectral energy / pressure distribution can be observed. The first few reflections already show whether certain frequency bands are rapidly absorbed. The absorbing materials can be identified and replaced in the virtual model, improving the overall acoustic quality of the simulated room. Furthermore an insight into the pressure / energy received at the listener position is possible. The phonon tracing algorithm as well as several sound visualization approaches are integrated into a common system utilizing Virtual Reality technologies in order to facilitate the immersion into the virtual scene. The system is a prototype developed within a project at the University of Kaiserslautern and is still a subject of further improvements. It consists of a stereoscopic back-projection system for visual rendering as well as professional audio equipment for auralization purposes.
Im Informationszeitalter haben die Menschen überall und jederzeit Zugang zu einer kontinuierlich ansteigenden Fülle von Informationen. Hierzu trägt vor allem die explosionsartig wachsende globale Vernetzung der Welt, insbesondere das Internet, maßgeblich bei. Die Transformation der verfügbaren Informationen in Wissen sowie die effiziente Nutzung dieses Wissens stellen dabei entscheidende Faktoren für den Erfolg eines Unternehmens oder eines Einzelnen dar. Es stellt sich also die Frage: Leben wir im Informationszeitalter? Diese Frage erinnert an die von Immanuel Kant in [65] gestellte Frage "Leben wir jetzt in einem aufgeklärten Zeitalter?" und dessen Antwort "Nein, aber wohl in einem Zeitalter der Aufklärung.". Entsprechend lässt sich auch die Frage "Leben wir in einem informierten Zeitalter?" mit "Nein, aber wohl in einem Zeitalter der Information" beantworten (vergleiche [14]). Das Problem, dass sich die überwältigende Fülle an Information ohne geeignete Hilfsmittel vom Menschen nicht oder nur schwer beherrschen lässt, hat im Laufe des letzten Jahrzehnts maßgeblich zur Entwicklung des äußerst dynamischen Forschungs- und Anwendungsgebietes der Visualisierung als Teilgebiet der Computergrafik beigetragen. Der Grund hierfür liegt in der Tatsache, dass der Mensch wesentlich besser mit visuellen Eindrücken als mit abstrakten Zahlen oder Fakten umgehen kann. Die Erkennung von Mustern in Daten (z. B. Gruppierungen und Häufungen) wird durch die Visualisierung stark vereinfacht und lässt vielmals Zusammenhänge zwischen Daten überhaupt erst greifbar werden. Unter computergestützter Visualisierung versteht man die in der Regel interaktive grafische Umsetzung von Daten. Handelt es sich dabei um physikalische Daten (z. B. entstanden durch Messvorgänge), so spricht man von Scientific Visualization. Handelt es sich eher um abstrakte bzw. nicht-physikalische Daten, so ordnet man die entsprechenden Verfahren der Information Visualization zu. Beide Teilgebiete der Visualisierung verfolgen jedoch das gemeinsame Ziel, Informationen dem Menschen sichtbar und verständlich zu machen und verwenden hierzu geeignete visuelle Paradigmen, häufig verbunden mit entsprechenden Interaktionsmöglichkeiten. Die vorliegende wissenschaftliche Arbeit ist in den Bereich der angewandten Computergrafik, speziell der interaktiven Visualisierung, einzuordnen. Die primären Ziele lagen dabei in der Übertragung des Begriffes kontextsensitiv auf den Bereich der Visualisierung zur Sicherstellung effizienter und kontextsensitiver Visualisierungsapplikationen sowie die Anwendung in aktuellen praktischen Aufgabenstellungen. Die Umsetzung einer kontextsensitiven Visualisierung gelingt im Rahmen dieser Arbeit durch die zukunftsweisende Kopplung von Visualisierungspipeline und Agententechnologie. Basierend auf der Identifikation zentraler Szenarien der kontextsensitiven Visualisierung wird eine agentenbasierte Visualisierungskontrolle durch intelligente Überwachung und Regelung der Visualisierungspipeline vorgestellt. Nach einer Zusammenfassung der relevanten Grundlagen aus den Gebieten der Visualisierung und der Agententechnologie folgen eine theoretische Klassifizierung und ein Überblick über existierende Systeme und Anwendungen aus beiden Bereichen. Anschließend wird das im Rahmen dieser Arbeit erarbeitete Paradigma der kontextsensitiven Visualisierung vorgestellt und die praktische, komponentenbasierte Umsetzung erläutert. Einen nicht unerheblichen Anteil der Arbeit machen drei innovative, auf der kontextsensitiven Visualisierung basierende Visualisierungsapplikationen aus, welche die Möglichkeiten und die Funktionsfähigkeit der entwickelten Architektur aufzeigen. Die Entwicklung einer plattformunabhängigen interaktiven Visualisierung beschäftigt sich insbesondere mit dem Auffinden der aktuell maximal möglichen Performance durch Abwägung der gegenläufigen Hauptparameter Qualität und Interaktivität und behandelt damit vor allem den System- und Interaktionskontext. Der Gedanke der plattformunabhängigen interaktiven Visualisierung wird anschließend auf mobile Informationssysteme ausgeweitet. Hier ist neben den Performanceaspekten vor allem die Art des Ausgabemediums, d. h. der Darstellungskontext, ein entscheidender Faktor. Die dritte Anwendung stellt eine agentenbasierte Applikation für die Bekleidungsindustrie in Form eines interaktiven Individual-Katalogs dar und behandelt insbesondere den Daten- und den Benutzerkontext. Eine kurze Zusammenfassung sowie ein Ausblick auf geplante zukünftige Entwicklungen runden letztlich die Betrachtungen ab.
The visualization of numerical fluid flow datasets is essential to the engineering processes that motivate their computational simulation. To address the need for visual representations that convey meaningful relations and enable a deep understanding of flow structures, the discipline of Flow Visualization has produced many methods and schemes that are tailored to a variety of visualization tasks. The ever increasing complexity of modern flow simulations, however, puts an enormous demand on these methods. The study of vortex breakdown, for example, which is a highly transient and inherently three-dimensional flow pattern with substantial impact wherever it appears, has driven current techniques to their limits. In this thesis, we propose several novel visualization methods that significantly advance the state of the art in the visualization of complex flow structures. First, we propose a novel scheme for the construction of stream surfaces from the trajectories of particles embedded in a flow. These surfaces are extremely useful since they naturally exploit coherence between neighboring trajectories and are highly illustrative in nature. We overcome the limitations of existing stream surface algorithms that yield poor results in complex flows, and show how the resulting surfaces can be used a building blocks for advanced flow visualization techniques. Moreover, we present a visualization method that is based on moving section planes that travel through a dataset and sample the flow. By considering the changes to the flow topology on the plane as it moves, we obtain a method of visualizing topological structures in three-dimensional flows that are not accessible by conventional topological methods. On the same algorithmic basis, we construct an algorithm for the tracking of critical points in such flows, thereby enabling the treatment of time-dependent datasets. Last, we address some problems with the recently introduced Lagrangian techniques. While conceptually elegant and generally applicable, they suffer from an enormous computational cost that we significantly use by developing an adaptive approximation algorithm. This allows the application of such methods on very large and complex numerical simulations. Throughout this thesis, we will be concerned with flow visualization aspect of general practical significance but we will particularly emphasize the remarkably challenging visualization of the vortex breakdown phenomenon.
Feature Based Visualization
(2007)
In this thesis we apply powerful mathematical tools such as interval arithmetic for applications in computational geometry, visualization and computer graphics, leading to robust, general and efficient algorithms. We present a completely novel approach for computing the arrangement of arbitrary implicit planar curves and perform ray casting of arbitrary implicit functions by jointly achieving, for the first time, robustness, efficiency and flexibility. Indeed we are able to render even the most difficult implicits in real-time with guaranteed topology and at high resolution. We use subdivision and interval arithmetic as key-ingredients to guarantee robustness. The presented framework is also well-suited for applications to large and unstructured data sets due to the inherent adaptivity of the techniques that are used. We also approach the topic of tensors by collaborating with mechanical engineers on comparative tensor visualization and provide them with helpful visualization paradigms to interpret the data.
This PhD thesis is concerned with the visual analysis of time-dependent scalar field ensembles as occur in climate simulations.
Modern climate projections consist of multiple simulation runs (ensemble members) that vary in parameter settings and/or initial values, which leads to variations in the resulting simulation data.
The goal of ensemble simulations is to sample the space of possible futures under the given climate model and provide quantitative information about uncertainty in the results.
The analysis of such data is challenging because apart from the spatiotemporal data, also variability has to be analyzed and communicated.
This thesis presents novel techniques to analyze climate simulation ensembles visually.
A central question is how the data can be aggregated under minimized information loss.
To address this question, a key technique applied in several places in this work is clustering.
The first part of the thesis addresses the challenge of finding clusters in the ensemble simulation data.
Various distance metrics lend themselves for the comparison of scalar fields which are explored theoretically and practically.
A visual analytics interface allows the user to interactively explore and compare multiple parameter settings for the clustering and investigate the resulting clusters, i.e. prototypical climate phenomena.
A central contribution here is the development of design principles for analyzing variability in decadal climate simulations, which has lead to a visualization system centered around the new Clustering Timeline.
This is a variant of a Sankey diagram that utilizes clustering results to communicate climatic states over time coupled with ensemble member agreement.
It can reveal
several interesting properties of the dataset, such as:
into how many inherently similar groups the ensemble can be divided at any given time,
whether the ensemble diverges in general,
whether there are different phases in the time lapse, maybe periodicity, or outliers.
The Clustering Timeline is also used to compare multiple climate simulation models and assess their performance.
The Hierarchical Clustering Timeline is an advanced version of the above.
It introduces the concept of a cluster hierarchy that may group the whole dataset down to the individual static scalar fields into clusters of various sizes and densities recording the nesting relationship between them.
One more contribution of this work in terms of visualization research is, that ways are investigated how to practically utilize a hierarchical clustering of time-dependent scalar fields to analyze the data.
To this end, a system of different views is proposed which are linked through various interaction possibilities.
The main advantage of the system is that a dataset can now be inspected at an arbitrary level of detail without having to recompute a clustering with different parameters.
Interesting branches of the simulation can be expanded to reveal smaller differences in critical clusters or folded to show only a coarse representation of the less interesting parts of the dataset.
The last building block of the suit of visual analysis methods developed for this thesis aims at a robust, (largely) automatic detection and tracking of certain features in a scalar field ensemble.
Techniques are presented that I found can identify and track super- and sub-levelsets.
And I derive “centers of action” from these sets which mark the location of extremal climate phenomena that govern the weather (e.g. Icelandic Low and Azores High).
The thesis also presents visual and quantitative techniques to evaluate the temporal change of the positions of these centers; such a displacement would be likely to manifest in changes in weather.
In a preliminary analysis with my collaborators, we indeed observed changes in the loci of the centers of action in a simulation with increased greenhouse gas concentration as compared to pre-industrial concentration levels.
Adaptive Extraction and Representation of Geometric Structures from Unorganized 3D Point Sets
(2009)
The primary emphasis of this thesis concerns the extraction and representation of intrinsic properties of three-dimensional (3D) unorganized point clouds. The points establishing a point cloud as it mainly emerges from LiDaR (Light Detection and Ranging) scan devices or by reconstruction from two-dimensional (2D) image series represent discrete samples of real world objects. Depending on the type of scenery the data is generated from the resulting point cloud may exhibit a variety of different structures. Especially, in the case of environmental LiDaR scans the complexity of the corresponding point clouds is relatively high. Hence, finding new techniques allowing the efficient extraction and representation of the underlying structural entities becomes an important research issue of recent interest. This thesis introduces new methods regarding the extraction and visualization of structural features like surfaces and curves (e.g. ridge-lines, creases) from 3D (environmental) point clouds. One main part concerns the extraction of curve-like features from environmental point data sets. It provides a new method supporting a stable feature extraction by incorporating a probability-based point classification scheme that characterizes individual points regarding their affiliation to surface-, curve- and volume-like structures. Another part is concerned with the surface reconstruction from (environmental) point clouds exhibiting objects that are more or less complex. A new method providing multi-resolutional surface representations from regular point clouds is discussed. Following the applied principles of this approach a volumetric surface reconstruction method based on the proposed classification scheme is introduced. It allows the reconstruction of surfaces from highly unstructured and noisy point data sets. Furthermore, contributions in the field of reconstructing 3D point clouds from 2D image series are provided. In addition, a discussion concerning the most important properties of (environmental) point clouds with respect to feature extraction is presented.
Maintaining complex software systems tends to be a costly activity where software engineers spend a significant amount of time trying to understand the system's structure and behavior. As early as the 1980s, operation and maintenance costs were already twice as expensive as the initial development costs incurred. Since then these costs have steadily increased. The focus of this thesis is to reduce these costs through novel interactive exploratory visualization concepts and to apply these modern techniques in the context of services offered by software quality analysis.
Costs associated with the understanding of software are governed by specific features of the system in terms of different domains, including re-engineering, maintenance, and evolution. These features are reflected in software measurements or inner qualities such as extensibility, reusability, modifiability, testability, compatability, or adatability. The presence or absence of these qualities determines how easily a software system can conform or be customized to meet new requirements. Consequently, the need arises to monitor and evaluate the qualitative state of a software system in terms of these qualities. Using metrics-based analysis, production costs and quality defects of the software can be recorded objectively and analyzed.
In practice, there exist a number of free and commercial tools that analyze the inner quality of a software system through the use of software metrics. However, most of these tools focus on software data mining and metrics (computational analysis) and only a few support visual analytical reasoning. Typically, computational analysis tools generate data and software visualization tools facilitate the exploration and explanation of this data through static or interactive visual representations. Tools that combine these two approaches focus only on well-known metrics and lack the ability to examine user defined metrics. Further, they are often confined to simple visualization methods and metaphors, including charts, histograms, scatter plots, and node-link diagrams.
The goal of this thesis is to develop methodologies that combine computational analysis methods together with sophisticated visualization methods and metaphors through an interactive visual analysis approach. This approach promotes an iterative knowledge discovery process through multiple views of the data where analysts select features of interest in one of the views and inspect data items of the select subset in all of the views. On the one hand, we introduce a novel approach for the visual analysis of software measurement data that captures complete facts of the system, employs a flow-based visual paradigm for the specification of software measurement queries, and presents measurement results through integrated software visualizations. This approach facilitates the on-demand computation of desired features and supports interactive knowledge discovery - the analyst can gain more insight into the data through activities that involve: building a mental model of the system; exploring expected and unexpected features and relations; and generating, verifying, or rejecting hypothesis with visual tools. On the other hand, we have also extended existing tools with additional views of the data for the presentation and interactive exploration of system artifacts and their inter-relations.
Contributions of this thesis have been integrated into two different prototype tools. First evaluations of these tools show that they can indeed improve the understanding of large and complex software systems.
Comparative Uncertainty Visualization for High-Level Analysis of Scalar- and Vector-Valued Ensembles
(2022)
With this thesis, I contribute to the research field of uncertainty visualization, considering parameter dependencies in multi valued fields and the uncertainty of automated data analysis. Like uncertainty visualization in general, both of these fields are becoming more and more important due to increasing computational power, growing importance and availability of complex models and collected data, and progress in artificial intelligence. I contribute in the following application areas:
Uncertain Topology of Scalar Field Ensembles.
The generalization of topology-based visualizations to multi valued data involves many challenges. An example is the comparative visualization of multiple contour trees, complicated by the random nature of prevalent contour tree layout algorithms. I present a novel approach for the comparative visualization of contour trees - the Fuzzy Contour Tree.
Uncertain Topological Features in Time-Dependent Scalar Fields.
Tracking features in time-dependent scalar fields is an active field of research, where most approaches rely on the comparison of consecutive time steps. I created a more holistic visualization for time-varying scalar field topology by adapting Fuzzy Contour Trees to the time-dependent setting.
Uncertain Trajectories in Vector Field Ensembles.
Visitation maps are an intuitive and well-known visualization of uncertain trajectories in vector field ensembles. For large ensembles, visitation maps are not applicable, or only with extensive time requirements. I developed Visitation Graphs, a new representation and data reduction method for vector field ensembles that can be calculated in situ and is an optimal basis for the efficient generation of visitation maps. This is accomplished by bringing forward calculation times to the pre-processing.
Visually Supported Anomaly Detection in Cyber Security.
Numerous cyber attacks and the increasing complexity of networks and their protection necessitate the application of automated data analysis in cyber security. Due to uncertainty in automated anomaly detection, the results need to be communicated to analysts to ensure appropriate reactions. I introduce a visualization system combining device readings and anomaly detection results: the Security in Process System. To further support analysts I developed an application agnostic framework that supports the integration of knowledge assistance and applied it to the Security in Process System. I present this Knowledge Rocks Framework, its application and the results of evaluations for both, the original and the knowledge assisted Security in Process System. For all presented systems, I provide implementation details, illustrations and applications.
Sound surrounds us all the time and in every place in our daily life, may it be pleasant music in a concert hall or disturbing noise emanating from a busy street in front of our home. The basic properties are the same for both kinds of sound, namely sound waves propagating from a source, but we perceive it in different ways depending on our current mood or if the sound is wanted or not. In this thesis both pleasant sound as well as disturbing noise is examined by means of simulating the sound and visualizing the results thereof. However, although the basic properties of music and traffic noise are the same, one is interested in different features. For example, in a concert hall, the reverberation time is an important quality measure, but if noise is considered only the resulting sound level, for example on ones balcony, is of interest. Such differences are reflected in different methods of simulation and required visualizations, therefore this thesis is divided into two parts. The first part about room acoustics deals with the simulation and novel visualizations for indoor sound and acoustic quality measures, such as definition (original "Deutlichkeit") and clarity index (original "Klarheitsmaß"). For the simulation two different methods, a geometric (phonon tracing) and a wave based (FEM) approach, are applied and compared. The visualization techniques give insight into the sound behaviour and the acoustic quality of a room from a global as well as a listener based viewpoint. Furthermore, an acoustic rendering equation is presented, which is used to render interference effects for different frequencies. Last but not least a novel visualization approach for low frequency sound is presented, which enables the topological analysis of pressure fields based on room eigenfrequencies. The second part about environmental noise is concerned with the simulation and visualization of outdoor sound with a focus on traffic noise. The simulation instruction prescribed by national regulations is discussed in detail, and an approach for the computation of noise volumes, as well as an extension to the simulation, allowing interactive noise calculation, are presented. Novel visualization and interaction techniques for the calculated noise data, incorporated in an interactive three dimensional environment, enabling the easy comprehension of noise problems, are presented. Furthermore additional information can be integrated into the framework to enhance the visualization of noise and the usability of the framework for different usages.
In urban planning, sophisticated simulation models are key tools to estimate future population growth for measuring the impact of planning decisions on urban developments and the environment. Simulated population projections usually result in large, macro-scale, multivariate geospatial data sets. Millions of records have to be processed, stored, and visualized to help planners explore and analyze complex population patterns. We introduce a database driven framework for visualizing geospatial multidimensional simulation data based on the output from UrbanSim, a software for the analysis and planning of urban developments. The designed framework is extendable and aims at integrating empirical-stochastic methods and urban simulation models with techniques developed for information visualization and cartography. First, we develop an empirical model for the estimation of residential building types based on demographic household characteristics. The predicted dwelling type information is important for the analysis of future material use, carbon footprint calculations, and for visualizing simultaneously the results of land usage, density, and other significant parameters in 3D space. Our model uses multinomial logistic regression to derive building types at different scales. The estimated regression coefficients are applied to UrbanSim output in order to predict residential building types. The simulation results and the estimated building types are managed in an object-relational geodatabase. From the database, density, building types, and significant demographic variables are visually encoded as scalable, georeferenced 3D geometries and displayed on top of aerial photographs in a Google Earth visual synthesis. The geodatabase can be accessed and the visualization parameters can be chosen through a web-based user interface. The geometries are encoded in KML, Google's markup language, as ready-to-visualize data sets. The goal is to enhance human cognition by displaying abstract representations of multidimensional data sets in a realistic context and thus to support decision making in planning processes.
Multi-Field Visualization
(2011)
Modern science utilizes advanced measurement and simulation techniques to analyze phenomena from fields such as medicine, physics, or mechanics. The data produced by application of these techniques takes the form of multi-dimensional functions or fields, which have to be processed in order to provide meaningful parts of the data to domain experts. Definition and implementation of such processing techniques with the goal to produce visual representations of portions of the data are topic of research in scientific visualization or multi-field visualization in the case of multiple fields. In this thesis, we contribute novel feature extraction and visualization techniques that are able to convey data from multiple fields created by scientific simulations or measurements. Furthermore, our scalar-, vector-, and tensor field processing techniques contribute to scattered field processing in general and introduce novel ways of analyzing and processing tensorial quantities such as strain and displacement in flow fields, providing insights into field topology. We introduce novel mesh-free extraction techniques for visualization of complex-valued scalar fields in acoustics that aid in understanding wave topology in low frequency sound simulations. The resulting structures represent regions with locally minimal sound amplitude and convey wave node evolution and sound cancellation in time-varying sound pressure fields, which is considered an important feature in acoustics design. Furthermore, methods for flow field feature extraction are presented that facilitate analysis of velocity and strain field properties by visualizing deformation of infinitesimal Lagrangian particles and macroscopic deformation of surfaces and volumes in flow. The resulting adaptive manifolds are used to perform flow field segmentation which supports multi-field visualization by selective visualization of scalar flow quantities. The effects of continuum displacement in scattered moment tensor fields can be studied by a novel method for multi-field visualization presented in this thesis. The visualization method demonstrates the benefit of clustering and separate views for the visualization of multiple fields.
In urban planning, both measuring and communicating sustainability are among the most recent concerns. Therefore, the primary emphasis of this thesis concerns establishing metrics and visualization techniques in order to deal with indicators of sustainability.
First, this thesis provides a novel approach for measuring and monitoring two indicators of sustainability - urban sprawl and carbon footprints – at the urban neighborhood scale. By designating different sectors of relevant carbon emissions as well as different household categories, this thesis provides detailed information about carbon emissions in order to estimate impacts of daily consumption decisions and travel behavior by household type. Regarding urban sprawl, a novel gridcell-based indicator model is established, based on different dimensions of urban sprawl.
Second, this thesis presents a three-step-based visualization method, addressing predefined requirements for geovisualizations and visualizing those indicator results, introduced above. This surface-visualization combines advantages from both common GIS representation and three-dimensional representation techniques within the field of urban planning, and is assisted by a web-based graphical user interface which allows for accessing the results by the public.
In addition, by focusing on local neighborhoods, this thesis provides an alternative approach in measuring and visualizing both indicators by utilizing a Neighborhood Relation Diagram (NRD), based on weighted Voronoi diagrams. Thus, the user is able to a) utilize original census data, b) compare direct impacts of indicator results on the neighboring cells, and c) compare both indicators of sustainability visually.
Ultraschall ist eines der am häufigsten genutzen, bildgebenden Verfahren in der Kardiologie. Dies ist durch die günstige Erzeugung, die Nicht-Invasivität und die Unschädlichkeit für die Patienten begründet. Nachteilig an den existierenden Geräten ist der Umstand, daß lediglich zwei-dimensionale Bilder generiert werden können. Zusätzlich können diese Bilder aufgrund anatomischer Gegebenheiten nicht aus einer wahlfreien Position akquiriert werden. Dies erschwert die Analyse der Daten und folglich die Diagnose. Mit dieser Arbeit wurden neue, algorithmische Aspekte des vier-dimensionalen, kardiologischen Ultraschalls ausgehend von der Akquisition der Rohdaten, deren Synchronisation und Rekonstruktion bis hin zur Visualisierung bearbeitet. In einem zusätzlichen Kapitel wurde eine neue Technik zur weiteren Aufwertung der Visualisierung, sowie zur visuellen Bearbeitung der Ultraschalldaten entwickelt. Durch die hier entwickelten Verfahren ist es möglich bestimmte Einschränkungen des kardiologischen Ultraschalls aufzuheben oder zumindest zu mildern. Hierunter zählen vor allem die Einschränkung auf zwei-dimensionale Schnittbilder, sowie die eingeschränkte Sichtwahl.
Die Computerisierung der Gesellschaft bedingt ein ständiges Zunehmen der Geschwindigkeit, mit der neue Daten erzeugt werden. Parallel zu dieser Entwicklung steigt der Bedarf an geeigneten Analyseverfahren, die in diesen großen und oftmals heterogenen Datenmengen Muster finden, Zusammenhänge entdecken und damit Wissen erzeugen. Das in dieser Arbeit entwickelte Verfahren findet die passende Struktur in einer ungeordneten, abstrakten Datenmenge, ordnet die zugrunde liegenden Informationen und bündelt diese somit für eine gezielte Anwendung. Dieser Prozess des Information Clustering ist zweistufig, es erfolgt zuerst ein generelles Clustering, an das sich eine interpretierende Visualisierung anschliesst. Für das Clustering wird das Verfahren der Voronoidiagramme erweitert. Durch den Einsatz einer generellen Distanzfunktion wird die Modellierung der durch die großen Datenmengen entstehenden multidimensionalen Parameter sowie weiterer Gewichte ermöglicht. Eine anschließende Visualisierung aus dem Bereich der Informationsvisualisierung unterstützt die Interpretation der neu gewonnenen Informationen. Für die praktische Anwendung wird die Stadtplanung betrachtet. In der Stadtplanung wird das Modell des Planungsablaufes eingesetzt, mit dem verschiedene Planungsalternativen erzeugt werden. Dieses Modell ist jedoch zu starr, um den dynamischen Anforderungen in der Realität gerecht zu werden. Das Information Clustering erweitert den klassischen Planungsablauf, die Flexibilität des Modells wird dadurch erhöht und die Komplexität reduziert. Das Ergebnis der Berechnung ist genau eine Planungsalternative, die sämtliche Eingabeparameter kanalisiert.
Knowledge discovery from large and complex collections of today’s scientific datasets is a challenging task. With the ability to measure and simulate more processes at increasingly finer spatial and temporal scales, the increasing number of data dimensions and data objects is presenting tremendous challenges for data analysis and effective data exploration methods and tools. Researchers are overwhelmed with data and standard tools are often insufficient to enable effective data analysis and knowledge discovery. The main objective of this thesis is to provide important new capabilities to accelerate scientific knowledge discovery form large, complex, and multivariate scientific data. The research covered in this thesis addresses these scientific challenges using a combination of scientific visualization, information visualization, automated data analysis, and other enabling technologies, such as efficient data management. The effectiveness of the proposed analysis methods is demonstrated via applications in two distinct scientific research fields, namely developmental biology and high-energy physics. Advances in microscopy, image analysis, and embryo registration enable for the first time measurement of gene expression at cellular resolution for entire organisms. Analysis of highdimensional spatial gene expression datasets is a challenging task. By integrating data clustering and visualization, analysis of complex, time-varying, spatial gene expression patterns and their formation becomes possible. The analysis framework MATLAB and the visualization have been integrated, making advanced analysis tools accessible to biologist and enabling bioinformatic researchers to directly integrate their analysis with the visualization. Laser wakefield particle accelerators (LWFAs) promise to be a new compact source of highenergy particles and radiation, with wide applications ranging from medicine to physics. To gain insight into the complex physical processes of particle acceleration, physicists model LWFAs computationally. The datasets produced by LWFA simulations are (i) extremely large, (ii) of varying spatial and temporal resolution, (iii) heterogeneous, and (iv) high-dimensional, making analysis and knowledge discovery from complex LWFA simulation data a challenging task. To address these challenges this thesis describes the integration of the visualization system VisIt and the state-of-the-art index/query system FastBit, enabling interactive visual exploration of extremely large three-dimensional particle datasets. Researchers are especially interested in beams of high-energy particles formed during the course of a simulation. This thesis describes novel methods for automatic detection and analysis of particle beams enabling a more accurate and efficient data analysis process. By integrating these automated analysis methods with visualization, this research enables more accurate, efficient, and effective analysis of LWFA simulation data than previously possible.
Die vorliegende Arbeit beschäftigt sich mit der visuellen Kontrolle raumplanerischer Entwürfe. Grundlage der Überlegungen ist das gegenwärtige Verfahren, der Planungsprozess, das zur Erstellung der Entwürfe führt. Der Entscheidungsweg hin zum endgültigen Ergebnis erfolgt zurzeit noch ohne Rechnerunterstützung. Die in den Planungsprozess Involvierten stützen ihre Entscheidungen bspw. auf Pläne, eigene Erfahrungen und Statistiken und fertigen im Verlauf von Diskussionsrunden verschiedene Entwürfe an. Dieser Ablauf ist komplex, aufgrund der eingehenden Daten und der damit zusammenhängenden Diskussionen, und langwierig da erst nach einigen Iterationsschritten ein Ergebnis vorliegt. Die Arbeit verfolgt das Ziel, die Akteure durch eine Rechnerunterstützung schneller und zielgerichtet zu einer Entscheidungsfindung zu führen. Meine Untersuchung des Anwendungsumfeldes hat ergeben, dass dies nur möglich ist, wenn zum Einen das entstehende System in der Lage ist, die großen, heterogenen Datenmengen zu verarbeiten und andererseits die Visualisierung der Ergebnisse in einer Form erfolgt, die den Akteuren vom bisherigen Planungsprozess her bekannt ist. Die Visualisierung darf dabei keine bewertende Aussage treffen, sondern muss die Informationen der Analyse neutral in einem dem Nutzer bekannten Format abbilden. Als Ansatzpunkt stellt sich der informelle Bereich der Entscheidungsfindung dar. Es werden zwei Lösungswege aus dem Bereich der Clusteringalgorithmen verfolgt, die die großen Datenmengen verarbeiten und analysieren. Als Ergebnis erhalten die Akteure durch das Voronoi-Diagramm direkt einen Entwurf, der die Einschätzungen aller Akteure widerspiegelt und durch ein Übereinanderlegen mit der Karte des Plangebietes dem klassischen Format im Rahmen des Planungsprozesses entspricht. Dadurch wird die Akzeptanz der Rechnerunterstützung bei den Beteiligten des Planungsprozesses gesteigert. Sollte dieser Entwurf noch keine direkte Zustimmung finden, kann über die entwickelte Informationsvisualisierung eine Anzeige und in der Folge eine Anpassung der Eingangsgrößen erfolgen und somit sehr schnell ein neuer Entwurf entwickelt werden. Die Visualisierung übernimmt dabei die Funktion der bisher in Papierform erstellten Pläne im Entscheidungsprozess und bietet damit auch fachfremden Beteiligten eine visuelle Kontrollmöglichkeit der Qualität des Entwurfes. Insgesamt werden mit dem Tool IKone die Akteure in Anlehnung an die standardmäßigen Abläufe und visuellen Darstellungen mittels eines rechnergestützten Systems unterstützt.
The recognition of patterns and structures has gained importance for dealing with the growing amount of data being generated by sensors and simulations. Most existing methods for pattern recognition are tailored for scalar data and non-correlated data of higher dimensions. The recognition of general patterns in flow structures is possible, but not yet practically usable, due to the high computation effort. The main goal of this work is to present methods for comparative visualization of flow data, amongst others, based on a new method for efficient pattern recognition on flow data. This work is structured in three parts: At first, a known feature-based approach for pattern recognition on flow data, the Clifford convolution, has been applied to color edge detection, and been extended to non-uniform grids. However, this method is still computationally expensive for a general pattern recognition, since the recognition algorithm has to be applied for numerous different scales and orientations of the query pattern. A more efficient and accurate method for pattern recognition on flow data is presented in the second part. It is based upon a novel mathematical formulation of moment invariants for flow data. The common moment invariants for pattern recognition are not applicable on flow data, since they are only invariant on non-correlated data. Because of the spatial correlation of flow data, the moment invariants had to be redefined with different basis functions to satisfy the demands for an invariant mapping of flow data. The computation of the moment invariants is done by a multi-scale convolution of the complete flow field with the basis functions. This pre-processing computation time almost equals the time for the pattern recognition of one single general pattern with the former algorithms. However, after having computed the moments once, they can be indexed and used as a look-up-table to recognize any desired pattern quickly and interactively. This results in a flexible and easy-to-use tool for the analysis of patterns in 2d flow data. For an improved rendering of the recognized features, an importance driven streamline algorithm has been developed. The density of the streamlines can be adjusted by using importance maps. The result of a pattern recognition can be used as such a map, for example. Finally, new comparative flow visualization approaches utilizing the streamline approach, the flow pattern matching, and the moment invariants are presented.
Today’s digital world would be unthinkable without complex data sets. Whether in private, business or industrial environments, complex data provide the basis for important and critical decisions and determine many processes, some of which are automated. This is often associated with Big Data. However, often only one aspect of the usual Big Data definitions is sufficient and a human observer can no longer capture the data completely and correctly. In this thesis, different approaches are presented in order to master selected challenges in a more effective, efficient and userfriendly way. The approaches range from easier pre-processing of data sets for later analysis and the identification of design guidelines of such assistants, new visualization techniques for presenting uncertainty, extensions of existing visualizations for categorical data, concepts for time-saving selection methods for subsets of data points and faster navigation and zoom interaction–especially in the web-based area with enormous amounts of data–to new and innovative orientation-based interaction metaphors for mobile devices as well as stationary working environments. Evaluations and appropriate use case of the individual approaches show the usability also in comparison with state-of-the-art techniques.
Due to the steadily growing flood of data, the appropriate use of visualizations for efficient data analysis is as important today as it has never been before. In many application domains, the data flood is based on processes that can be represented by node-link diagrams. Within such a diagram, nodes may represent intermediate results (or products), system states (or snapshots), milestones or real (and possibly georeferenced) objects, while links (edges) can embody transition conditions, transformation processes or real physical connections. Inspired by the engineering sciences application domain and the research project “SinOptiKom: Cross-sectoral optimization of transformation processes in municipal infrastructures in rural areas”, a platform for the analysis of transformation processes has been researched and developed based on a geographic information system (GIS). Caused by the increased amount of available and interesting data, a particular challenge is the simultaneous visualization of several visible attributes within one single diagram instead of using multiple ones. Therefore, two approaches have been developed, which utilize the available space between nodes in a diagram to display additional information.
Motivated by the necessity of appropriate result communication with various stakeholders, a concept for a universal, dashboard-based analysis platform has been developed. This web-based approach is conceptually capable of displaying data from various data sources and has been supplemented by collaboration possibilities such as sharing, annotating and presenting features.
In order to demonstrate the applicability and usability of newly developed applications, visualizations or user interfaces, extensive evaluations with human users are often inevitable. To reduce the complexity and the effort for conducting an evaluation, the browser-based evaluation framework (BREF) has been designed and implemented. Through its universal and flexible character, virtually any visualization or interaction running in the browser can be evaluated with BREF without any additional application (except for a modern web browser) on the target device. BREF has already proved itself in a wide range of application areas during the development and has since grown into a comprehensive evaluation tool.
Due to remarkable technological advances in the last three decades the capacity of computer systems has improved tremendously. Considering Moore's law, the number of transistors on integrated circuits has doubled approximately every two years and the trend is continuing. Likewise, developments in storage density, network bandwidth, and compute capacity show similar patterns. As a consequence, the amount of data that can be processed by today's systems has increased by orders of magnitude. At the same time, however, the resolution of screens has hardly increased by a factor of ten. Thus, there is a gap between the amount of data that can be processed and the amount of data that can be visualized. Large high-resolution displays offer a way to deal with this gap and provide a significantly increased screen area by combining the images of multiple smaller display devices. The main objective of this dissertation is the development of new visualization and interaction techniques for large high-resolution displays.